CE-UWL — Full Technical Specifications
Complete engineering specifications for the POTWASHER CE-UWL: a 27.4 kW door-type pot washer with an 820 × 670 × 660 mm chamber, 3.6 L per rack, and an 85 °C sanitizing rinse.
| Capacity & throughput | |
|---|---|
| Rated capacity | 20–30 racks/hour |
| Wash water per rack | 3.6 L |
| Typical cycle time | 3–5 minutes |
| Dimensions | |
| Wash chamber (W × D × H) | 820 × 670 × 660 mm |
| External (D × W × H) | 1030 × 895 × 1825 mm |
| Power & heating | |
| Wash pump | 3 kW IP55 |
| Wash-tank heater | 9 kW |
| Rinse booster heater | 15 kW |
| Total electrical load | 27.4 kW |
| Power supply | 380V / 50Hz / 3PH (220V / 50Hz / 1PH variant available) |
| Cable cross-section | 10 mm² |
| Temperatures | |
| Wash temperature | 68–70 °C |
| Rinse (sanitizing) temperature | 85 °C |
| Construction | |
| Material | SUS 304 |
| Door | Split door, fold-down work platform |
| Spray arms | Triangular over/under |
| Wash-pump protection | IP55 |
| Plumbing & exhaust | |
| Water inlet | ¾", 0.2–0.5 MPa |
| Water outlet | 1½" |
| Exhaust pipe | φ175 mm |
| Recommended water hardness | < 5 °dH (or with softener) |
Power-draw breakdown
- Wash-tank heater: 9 kW
- Rinse booster heater: 15 kW
- Wash pump: 3 kW IP55
- Total connected load: 27.4 kW
- Supply cable cross-section: 10 mm²
Plumbing & exhaust
- Water inlet: ¾", 0.2–0.5 MPa
- Water outlet: 1½"
- Exhaust pipe: φ175 mm (overhead hood recommended)
- Recommended feed-water hardness: < 5 °dH (or with a softener)
Operating environment
- Recommended kitchen ambient: 5–40 °C, non-condensing
- Noise: comparable to a standard commercial dishwasher in operation (acoustic test data on request)
- Net / shipping weight and crate dimensions: provided on the spec-sheet PDF (placeholder pending final crating data)
Power-supply variants
- Standard: 380V / 50Hz / 3PH
- Optional: 220V / 50Hz / 1PH
- On request: 208V/60Hz (US), 415V/50Hz, 480V/60Hz